Hurst extrication tool - E-draulic battery powered combination tool

Description

Hurst extrication tool - E-draulic battery powered combination tool.
For sale is a used hurst rescue tool. Commonly known as the Jaws of Life. This is a combination tool used to cut and spread. New this package cost ,600. This tool works great.
Includes: Tool/2 batteries/charger/plug in adapter.
No warranty or guarantee expressed or implied. Price is OBO. Possible FOID/crossbow/motorcycle/jeep trades, let me know what you've got. Purchased from local fire department (FD).
Canned specs:
SC 350E ELECTRO-HYDRAULIC COMBINATION TOOL
1. The tool is a designed hydraulically activated piston with two equal, opposite blade arms arms that are symmetrically opened by mechanical joints, thereby spreading, squeezing, pulling or cutting objects.
2. Electro-hydraulic devices do not need to be connected to an external hydraulic source, generation of the required hydraulic pressure takes place within the body of the device by either a quick exchange lithium/ion battery or an external power supply.
3. The electro-hydraulic tool is equipped with lights to facilitate work under poor lighting conditions.
4. The cylinder of the tool shall be made of anti-corrosive light aluminium alloy for its lightweight, strength and long life. The
body of the tool shall have a high impact, non-metallic housing. The housing shall have ventilation holes on both sides of the unit for cooling the motor.
5. The maximum spreading force shall be up to 25,400 lbf (113 kN). The maximum spreading force measured .98 in (25 mm) from the tips shall be up to 6,294 lbf (28 kN). NFPA HSF test point produced 8,318 lbf (37 kN), the LSF test point produced 5,395 lbf (24 kN).
6. The tool shall produce a spreading distance up to 14.2 in (360 mm) measured at the blade tips.
7. The tool shall produce a maximum pulling force of 9,217 lbf (41 kN). NFPA HPF test point produced 11,015 lbf (49 kN),
the LPF test point produced 6,744 lbf (30 kN).
8. To maximize the capability of the combination tool the unit should include an optional chain and shackle package for pulling operations, use only HURST chain set KSV 8.
9. The tool shall produce a pulling distance of 14.6 in (371 mm).
10. The tips are patented multifunctional tips that can be used for spreading, peeling, squeezing and pulling without the need to
be changed. The tips are to be serrated and made from investment cast heat-treated steel.
11. The tool shall product cutting forces up to 80,931 lbf (360 kN) measured at the rear end of the cutting surface and will be able to cut 1.18 in (30 mm) diameter round stock steel material.
12. The maximum cutter opening shall be 10.4 in (265 mm) and shall include a notch to focus maximum cutting force.
13. The blades of the tool shall be of a straight serrated edge design for maximum cutting performance. The blades shall have integral tips for spreading applications. The blades of the tool shall contain shackle holes for pulling applications. The blades of the tool should be attached to the piston rod via removable links, for ease of repair, efficient power transmission and smooth operation. The blades shall be made of investment cast dropped-forged steel glass pearl blasted for long-life and quality. The blades are regrind able. The pivot points of the blades shall have rubber booted hand guard for safety purposes.
14. The control mechanism shall feature a star-grip control actuator for ease of operation by allowing 360 o operations in any position. The tool must provide a non-interflow shear seal “dead man” actuator, whereby the unit stops functioning when thumb pressure is released. The star grip automatically returns to the central position, guaranteeing the full load-holding.
15. The tool shall have two handles. One located at the center of the tool and the other located below the control mechanism. The center crossbar handle allows easy ergonomic manipulation from the center or either side.
16. The tool will be equipped with a dual pilot check valve. This is to prevent accidental movement of the arms in the event of power loss.
17. The tool shall be protected by a pressure relief valve that prevents it from being over pressurized.
18. The tool dimensions without the battery shall not be any longer than 35.75 (908 mm), wider than 8.86 in (225 mm) or
higher than 11.42 in (290 mm).
19. The maximum operating pressure to the tool will be 10,200 psi (70 MPa) (700 bar).
20. The nominal electrical voltage (with power supply) is 24 V. The nominal electrical voltage (with lithium/ion battery) is 25.2 V.
21. The estimated current consumption at nominal voltage is 12 amps at idle mode and 36 amps at maximum load.
22. The tool shall be able to tolerate an ambient temperature range of -4oF (-20oC) up to +131oF (+55oC).
23. The tool must be NFPA 1936; 2010 Edition certified and shall be labelled as such bearing the mark of the testing agency. Cutting classification A6 / B7 / C7 / D7 / E7.
24. The tool will not weigh more than 43.7 lbs (19.8 kg) without the battery or cable plug.