3kg/h Ultrasonic Industrial Humidifier Cooler Sprayer Moisture Control Dedusting

Description

Ultrasonic Industrial Humidifier Cooler Sprayer 3KG/H
1. Ensure atomized  humidifying effects, cleaning the inner machine regular, one time one  month, cleaning method as follows:
A. Open cover, using  soft cloth or brush cleaning atomization device(Do not scratch  atomization device as well as water level induction switch, the home  detergent can not be used), cleaning the scale, then washing by clean  water;
B. While watering, do  not pour the water into the circuit board to lead to short circuit.
C. Close cover
2. Ensure machine runs  normally long time, water filter should be regularly cleaned, one time  one month, cleaning method is as follows:
A. Open the cover of  filter;
B. Removing dirt from  filter;
C. Close it again.
Parameters :
1 .Fog volume: ≥
3KG/
H
2. Humidity: 1%-99%
3. Power supply: AC
110V
4. Power:
350W
5. N.W.:
48.5lbs
6. Control method: humidity control
7. Applicable  space:
2
0-50m
²
(200-500sq.ft)
8.
Hole:
4.3inch
（110mm）*
1
9. Water supply quality: purified water, tap water (softened)
10. Material: Stainless Steel
11. Air Volume: 160m³/h
12. 69*32*40cm  (27.16"*12.6"15.75")
Working principle:
The
high frequency vibration of atomizing film will throw the water out of the surface and shape the natural and flying water fog, produce water particle of 1-10μand float in the air without heating or adding chemical, so as to achieve humidification. The appropriate relative humidity will have the decisive function in the improvement of product quality, reducing of scrap rate, anti-static, eliminating dust, air purification and environment improvement etc.
Details:
The drinking bucket and pipe showed in the picture are not included.
Item included(191105):
1*
Ultrasonic industrial humidifier cooler sprayer
1
*
Hose
2*Key
4*Wheels
On May-27-20 at 02:01:22 PDT, seller added the following information: